8 posts / 0 new
Last post
rchoubey
IoT Edge Router Snappy Application

What are the basic hardware and software required for collecting sensor data over BLE and storing the data in the Data Platform ?

msharma
Re:- IoT Edge Router Snappy Application

The required hardware are IoT Edge Router, Accessory Kit ,TI Sensor Tag CC6250,USB Bluetooth 4.0 Low Energy Micro Adapter and

software requirements are starfish-sensortag-app_0.3_armhf.snap, starfish-sensortag-app_X.XX_armhf.snap

rchoubey
Re:- IoT Edge Router Snappy Application

What are the installation steps for starfish sensortag snappy app ?

msharma
Re:-IoT Edge Router Snappy Application

Log into the dev account on your IoT Edge Router (user=dev; pass=starfish)

wget https://github.com/silverspringnetworks/developer_program/raw/master/HDK/IoT_Router_BLE/ready_to_use_snaps/armhf/starfish-sensortag-app_0.3_armhf.snap

Install the snap:    sudo snap install --dangerous --devmode starfish-sensortag-app_0.3_armhf.snap

rchoubey
Re:- IoT Edge Router Snappy Application

How to upgrade the snap app when a new revision becomes available ?

msharma
Re:- IoT Edge Router Snappy Application

Please follow these steps,

1) Download the new snap from GitHub: wget   https://github.com/silverspringnetworks/developer_program/raw/master/HDK/IoT_Router_BLE/ready_to_use_snaps/armhf/starfish-sensortag-app_X.XX_armhf.snap 2) Remove the previous snap: sudo snap remove starfish-sensortag-app_0.3_armhf.snap 3) Install the new snap: sudo snap install --dangerous --devmode starfish-sensortag-app_X.XX_armhf.snap  

rchoubey
Re:- IoT Edge Router Snappy Application

How can i see the UUID of TI Sensor tag ?

msharma
Re:- IoT Edge Router Snappy Application

Please follow the below steps for getting the UUID for your sensor tag:

1. Power On the TI Sensor-tag in order to be detected from the IoT Edge Router board.

2. Install of .hcitool. for Ubuntu Core OS on the IoT Edge Router platform board.

3. Scan TI sensor tag using hcitool lescan command (installed as part of BLE Reference Snap. It should provide the UUID which is required to connect to TI sensor tag